Analysis of Process Quality in the Weaving Section Using Failure Mode and Effect Analysis and Fault Tree Analysis: A Case Study of PT XYZ

Dilla Fajar Atikasari, Yun Yun

Abstract


This study aims to determine the main causes of warp-jump defects in gray fabric production at PT XYZ using Failure Mode and Effects Analysis (FMEA) and Fault Tree Analysis (FTA). This analysis identified two main causes: decreased machine performance and operator fatigue. The FMEA results indicate that these factors contribute significantly to product defects, with machine performance having the highest Risk Priority Number (RPN). This study suggests that routine machine maintenance and improved workforce management through closer training and supervision are crucial to reducing defects and increasing operational efficiency.

Keywords


Skip yarn, Failure Mode and Effect Analysis (FMEA), Fault Tree Analysis (FTA)

Full Text:

PDF

References


Andriansyah, A. R., & Sulistyowati, W., 2021. Clarisa Product Quality Control Using Methods Lean Six Sigma and Fmeca Method (Failure Mode And Effect Cricitality Analysis) (Case Study: Pt. Maspion Iii). PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 4(1), 47–56.

Aprila, D., Andriani, W., Ananto, R. P., 2023. Financial Management of Nagari Owned Enterprises (BUMNAG) and Its Impact on Community Welfare. Jurnal Akuntansi Bisnis, 16(2), 210–225.

Chuenyindee, T., Prasetyo, Y. T., 2020. Roller Chains Quality Enhancement using Six Sigma and Failure Mode and Effects Analysis (FMEA). Conference: MSIE 2020: 2020 2nd International Conference on Management Science and Industrial Engineering, 219–224.

Fithri, P., Putra, A. D., Prabuwono, A. S., Pawenary, P., 2023. Quality Control of Camille Beauty Face Mask Products Using Failure Mode and Effect Analysis Method : A Case Study. Andalasian International Journal of Applied Science, Engineering, and Technology (Online), 3(2), 142–148.

Fithri, P., Riva, N. A., Susanti, L., Yuliandra, B., 2018. Safety analysis at weaving department of PT. X Bogor using Failure Mode and Effect Analysis (FMEA) and Fault Tree Analysis (FTA). IEA, 382–385.

Hanum, B., 2022. Quality Control Analysis of Metal Baseplate Finishing process using Statistical Process Control (SPC) and Failure Mode and Effect Analysis (FMEA): A Case Study of Indonesia Company. International Journal of Scientific and Academic Research, 2(6), 9–18.

Li, X. D. G., 2024. Design and Application of Visual Performance Appraisal Based on the Fishbone Diagram. Xian Dai Guan Li, 14(9), 2285–2291.

Maynard, H. B., Zandin, K. B., 2001. Maynard’s industrial engineering handbook. IIndustrial engineering handbook, 5th ed. McGraw-Hill.

Mislan, Hardi Purba, H,. 2020. Quality Control of Steel Deformed Bar Product using Statistical Quality Control (SQC) and Failure Mode and Effect Analysis (FMEA). IOP Conference Series. Materials Science and Engineering, 1007(1), 12119.

Mulyana, I. J., Hartoyo, S. S., Sianto, M. E., 2022. Defect Analysis of Printing Process in Offset Printing Industry by Using Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA). Journal of Integrated System, 5(2), 143–155.

Neves, M. E. D., Reis, S., Reis, P., Dias, A. G., 2024. Impact of ISO 14001 and ISO 9001 adoption on corporate performance: evidence on a bank-based system. International Journal of Productivity and Performance Management, 73(5), 1641–1667.

Novianti, F., Rochmoeljati, R., 2023. Quality Control of Edamame Products Using Statistical Quality Control (SQC) and Failure Mode Effect Analysis (FMEA) Methods in PT. XYZ. IJIEM - Indonesian Journal of Industrial Engineering and Management, 4(2), 221.

Östlund, U., Kidd, L., Wengström, Y., Rowa-Dewar, N., 2011. Combining qualitative and quantitative research within mixed method research designs: A methodological review. International Journal of Nursing Studies, 48(3), 369–383.

Pascu, I., Paraschiv, D., Didu, A., 2020. Research about using the Failure Mode and Effects Analysis method for improving the quality process performance. IOP Conference Series. Materials Science and Engineering, 898(1), 12037.

Proudfoot, K., 2023. Inductive/Deductive Hybrid Thematic Analysis in Mixed Methods Research. Journal of Mixed Methods Research, 17(3), 308–326.

Riptanti, E. W., Irianto, H., Mujiyo, M., 2023. Challenges in the Development of Porang Tuber Processing Industry with the Fishbone Diagram Approach. Universal Journal of Agricultural Research, 11(5), 768–776.

Romadhoni, A., Dahdah, S. S., 2024. Quality Control Analysis of Painting Results in Steel Construction Projects Using Statistical Quality Control Methods and Failure Mode Effect Analysis at PT. BSB. Jurnal Teknik Industri, 10(1), 107.

Rusandi, K. E., Sulistiyowati, W., 2019. Quality Control of Plastic Cup Products Using Statistical Process Control Methods and Failure Modes and Effect Analysis. Indonesian Journal of Innovation Studies, 7.

Tortorella, G. L., Fogliatto, F. S., Cauchick-Miguel, P. A., Kurnia, S., Jurburg, D., 2021. Integration of Industry 4.0 technologies into Total Productive Maintenance practices. International Journal of Production Economics, 240, 108224.

Venkatesh, V., Brown, S. A., Bala, H., 2013. Bridging the Qualitative-Quantitative Divide: Guidelines for Conducting Mixed Methods Research in Information Systems. MIS Quarterly, 37(1), 21–54.

Yun, Y., 2020. Koordinasi dan Integrasi Rantai Pasokan Produk Pangan di Kabupaten Bandung Barat. Inovator, 9(2), 106.

Yun, Y., Kurniawan, A., 2023. Model of Cooperative Performance Influence Supply Chain Management in the Field of Food Production Cooperatives in West Bandung Regency. International Conference on Sustainability in Technological, Environmental, Law, Management, Social and Economic Matters (ICOSTELM 2022), 92–103.




DOI: http://dx.doi.org/10.33087/ekonomis.v9i2.2370

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Ekonomis: Journal of Economics and Business Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat
Adress: LPPM Universitas Batanghari, Jl.Slamet Ryadi, Broni-Jambi, Kec.Telanaipura, Kodepos: 36122, email: ekonomis.unbari@gmail.com, Phone: 0741-670700

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.