Analisis Pengendalian Kualitas Produk Infusion Stand Menggunakan Metode New Seven Tools dan Failure Mode and Effects Analysis (FMEA) di PT XYZ

Diana Widyawati, Rr. Rochmoeljati, Isna Nugraha

Abstract


This study aims to determine the factors that influence the quality of infusion stand products at PT. XYZ. The research method used in this study is the New Seven Tools method and Failure Mode and Effects Analysis (FMEA). The data collection technique uses interview and observation methods. Based on the results of the study, it is known that the factors that influence defects in infusion stand products are based on human factors, material factors, machine factors, method factors, and environmental factors. It is also known that defects with the highest Risk Priority Number value which will be a priority for repair are broken wheel defects with an RPN value of 280.

Keywords


Failure Mode and Effect Analysis, New Seven Tools, Product Quality

Full Text:

PDF

References


Hamdani, Wahyudin, Putra, C. G. G., Subangkit, B., 2021. Analisis Pengendalian Kualitas Produk 4L45W 21.5 MY Menggunakan Seven Tools dan Kaizen. Go-Integratif : Jurnal Teknik Sistem dan Industri, 2(2), 112–123.

Kistianto, D. G., Prakoso, I., 2023. Analisis Kualitas Produk Joran Pancing dengan Menggunakan Metode New Seven Tools (Studi Kasus: PT. X). Jurnal Ilmiah Teknik dan Manajemen Industri, 3(1), 68–79.

Kurnia, R. F., Muttaqin, A. Z., Khoiri, H. A., 2023. Analisis Pengendalian Kualitas pada MF-1 Produksi Sarung Tangan Golf PT Adi Satria Abadi Yogyakarta dengan Menggunakan Metode DMAIC. Scientica: Jurnal Ilmiah Sain dan Teknologi, 1(1). 69-81

Lafeniya, S. D. A., Suseno, 2022, Pengendalian Kualitas Produk Kain Grey dengan Metode New Seven Tools pada PT Djohartex, Jurnal Inovasi dan Kreativitas (JIKa), 2(2), 46-56

Mislan, Purba, H. H., 2020. Quality control of steel deformed bar product using statistical quality control (SQC) and failure mode and effect analysis (FMEA). IOP Conference Series: Materials Science and Engineering, 1007(1).

Prasetyo, R., Bakhti, Y. K., 2022. Pengendalian Kualitas Produk Pakaian Anak pada Industri Garment dengan Metode Seven Tools. Jurnal Inkofar, 6(1), 39–51.

Shiyamy, A. F., Rohmat, S., Sopian, A., 2021. Analisis Pengendalian Kualitas Produk dengan Statistical Process Control. KOMITMEN: Jurnal Ilmiah Manajemen, 2(2), 32–45.

Suhartini, Basjir, M., Hariyono, A. T., 2020. Pengendalian Kualitas dengan Pendekatan Six Sigma dan New Seventools sebagai Upaya Perbaikan Produk. Journal of Research and Technology, VI, 297–311.

Suseno, Damayanti, V. N., 2022. Analisis Pengendalian Kualitas Produk dengan Menggunakan Metode Statistical Process Control (SPC) dan New Seven Tools di PT Hari Mukti Teknik. Jurnal Cakrawala Ilmiah, 1(6), 1547–1558.

Wicaksono, A., Yuamita, F., 2022. Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode and Effect Analysis (FMEA) untuk Meminimumkan Cacat Kaleng di PT. Maya Food Industries. Jurnal Teknologi dan Manajemen Industri Terapan (JTMIT), 1(1), 1-6.

Wirawati, S. M., Juniarti, A. D., 2020. Pengendalian Kualitas Produk Benang Carded untuk Mengurangi Cacat dengan Menggunakan Failure Mode and Effect Analysis (FMEA). Jurnal InTent, 3(2). 90-98

Zaqi, A., Faritsy, A., Prasetiyo, H. H., 2022. Analisis Pengendalian Kualitas Produk Ember Cat Tembok 5kg Menggunakan Metode New Seven Tools (Studi Kasus: PT. X). Jurnal Teknologi Dan Manajemen Industri Terapan (JTMIT), 1(3), 231–242.




DOI: http://dx.doi.org/10.33087/ekonomis.v9i2.2012

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Ekonomis: Journal of Economics and Business Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat
Adress: LPPM Universitas Batanghari, Jl.Slamet Ryadi, Broni-Jambi, Kec.Telanaipura, Kodepos: 36122, email: ekonomis.unbari@gmail.com, Phone: 0741-670700

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.