Analisa Kecacatan Produk Menggunakan Metode Statistical Process Control (SPC) dan Failure Mode and Effects Analysis (FMEA)
Abstract
The purpose of this study is to determine the causes of product defects and provide suggestions for improvement and find out how to control defects in product quality. The research method is carried out by combining 2 (two) methods, namely: Statistical Process Control and Failure Mode and Effects Analysis. The results show that the highest defects occurred in October 1,319 out of 154,800 bags and the lowest occurred in November 1,209 out of 144,900 bags. Types of defects, namely: imperfect sealing as many as 2,175 bags; loose stitches as many as 4,241 bags; and bulging bags as many as 1,169 bags. The analysis suggests improvements in production, worker skills, machine maintenance, SOP (standard operating procedures), and working conditions.
Keywords
Full Text:
PDFReferences
Ali, Muhamad. 2018. Sample Buku Manajemen Industri 4.0. UNY Press
Ardiansyah, N., Wahyuni, H. C., 2018. Product Quality Analysis Using FMEA and Fault Tree Analysis (FTA) Methods at Exotic UKM Intako. PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 2(2), 58-63.
Asmoko, Hindri, 2016, Teknik Analisis Permasalahan-Menentukan Masalah Prioritas, Pusdiklat Pengembangan SDM, Magelang.
Chandrasari, S. H., Syahrullah Y., 2022. Penerapan Statistical Process Control (SPC) dan Fault Tree Analysis (FTA) dalam Pengendalian Kualitas Plywood Untuk Mengurangi Defect Pada Pabrik Kayu di Purbalingga. Jurnal Media Teknik dan Sistem Industri 6(2), 107-115
Fajirin, M. T., Wiwik. S., 2018. Pengurangan Defect pada Produk Sepatu dengan Mengintegrasikan Statistical Process Control (SPC) dan Root Cause Analysis (RCA) Studi Kasus PT. XYZ. Spektrum Industri 16(1), 29–40.
Kartika, R. N., Hidayah, N. A., Muadzah, 2022. Penggunaan FMEA dalam Mengindentifikasi Resiko Kegagalan pada Proses Produksi Cetak Blok Kalender (Studi Kasus : PT. XYZ). Bullet: Jrnal Multidisiplin Ilmu, 1(6), 1311–1321.
Ratri, E. M., Bambang, G. E., Singgih, M., 2018. Peningkatan Kualitas Produk Roti Manis pada PT Indoroti Prima Cemerlang Jember Berdasarkan Metode Statistical Process Control (SPC) dan Failure Mode and Effect Analysis (FMEA). e-Journal Ekonomi Bisnis dan Akuntansi, 5(2), 200
Riyono, J., Pujiastuti, C. E., Prayitno, D., 2023. Pelatihan Pembuatan Diagram Peta Kendali Atribut Pada Proses Kontrol Produk Dengan Minitab Di Bekasi. Kocenin Jurnal Pengabdian Kepada Masyarakat, 3(1), 1–8.
Rosyidi, M. R., Narto. 2022. Penelitian Pengendalian Kualitas Batu Nisan dengan Menggunakan Seven Tools, Jurnal Optimalisasi, 9(1), 45-53
Suseno, Damayanti, V. N., 2022. Analisa Pengendalian Kualitas Produk dengan Menggunakan Metode Statistical Process Control (SPC) Dan New Seven Tools di PT Hari Mukti Teknik. Jurnal Cakrawala Ilmiah 1(6), 1547–1558.
Saputra, R., Santoso, D. T., 2021. Analisis Kegagalan Proses Produksi Plastik pada Mesin Cutting di PT. FKP dengan Pendekatan Failure Mode and Effect Analysis dan Diagram Pareto. Barometer 6(1), 322–327.
Sofiana, A., Safitri, E. P., 2023. Quality Control Related to Inventory Loss of Animal Feed Raw Materials Using I-MR Control Map (Case Study: PT Cargill Indonesia, Plant Semarang). Opsi 16(1), 35-44
Stephanie, T., Ivana, S., Melinda, V,. 2022. Proses Pembuatan Krimer Nabati di Pt. Santos Premium Krimer, Sukodono - Sidoarjo, Laporan Praktik Kerja Industri Pengolahan Pangan, Universitas Katolik Widya Mandala Surabaya
Susanto, A., Cahyana, A. S,. 2017. Pengaruh Motivasi Dan Gaya Kepemimpinan Terhadap Prestasi Karyawan Dengan Metode Structural Equation Modelling. PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 1(1), 1–10.
DOI: http://dx.doi.org/10.33087/ekonomis.v9i1.2017
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Ekonomis: Journal of Economics and Business Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat |
