Analisis Green Manufacturing Guna Meningkatkan Sustainability pada PT. XYZ Menggunakan Metode Life Cycle Assessment

Utari Rahayu, Endang Pudji W

Abstract


This study aims to measure the eco cost and determine the environmental impact of the CPO (Crude Palm Oil) production process and find suggestions for green manufacturing improvements in the CPO production process at PT XYZ. The research method used is the life cycle assessment (LCA) method through 4 (four) stages, namely: goal and scope definition; life cycle inventory; life cycle impact assessment; and interpretation. Furthermore, eco efficiency calculations are carried out to produce an eco cost value. The results of the study showed that the eco cost value of PT XYZ was Rp. 1,997,127. The potential impacts found were acidification, eutrophication, global warming, human toxicity, and photochemical oxidation. Global Warming is the biggest impact resulting from the CPO production process, which is 5.22 × 10^(-11) kg CO2 eq. With the use of diesel fuel as the most impactful material unit. Therefore, the proposed improvements given are utilizing empty fruit bunches and POME liquid waste as fuel and renewable energy and implementing a co-firing system to reduce emissions resulting from the CPO production process.


Keywords


Eco Efficiency, Green Manufacturing, LCA

Full Text:

PDF

References


Arba, Y., Thamrin, S., 2022. Journal Review: Perbandingan Pemodelan Perangkat Lunak Life Cycle Assessment (LCA) untuk Teknologi Energi. Jurnal Energi Baru dan Terbarukan, 3(2), 142-153

Astuti, A. D., 2019, Analisis Potensi Dampak Lingkungan dari Budidaya Tebu Menggunakan Pendekatan Life Cycle Assessment (LCA), Jurnal Litbang: Media Informasi Penelitian, Pengembangan dan IPTEK, 15(1), 51–64.

Fauzi, A., 2015, Pengaruh Green Supply Chain Management (Gscm) Terhadap Kinerja Lingkungan Yang Dimoderasi Oleh Total Quality Environment Management (Tqem) Pada Pt. Pembangkitan Jawa Bali (Pjb) Unit Pembangkitan (Up) Gresik. Skripsi, Universitas Airlangga.

Hardianto, Sunaryo, D. K., Sudiasa, I, N., 2022, Penilaian Daur Hidup (Life Cycle Assessment) Menggunakan Software SimaPro dan openLCA, Eureka Media Aksara. Purbalingga.

Lesmana, A. S., Ganefi, H. S., Jahidah, N. S., 2024, Edukasi Green Manufacturing dan Pemanfaatan Limbah Hasil Produksi Pada UKM Tahu-Tempe, Journal Communnity Development, 5(1), 591–598.

Lolo, E. U., Gunawan, R., Krismani, A. Y., Pambudi, Y. S., 2021, Penilaian Dampak Lingkungan Industri Tahu Menggunakan Life Cycle Assessment (Studi Kasus: Pabrik Tahu Sari Murni Kampung Krajan, Surakarta), Jurnal Serambi Engineering, 6(4), 2337–2347.

Mustakim, Handayani, D. I., Yustina, S., 2021, Pemanfaatan Limbah Plastik Sebagai Bahan Campuran Batako dalam Implementasi Green Manufacturing, Jurnal Flywheel, 12(2), 43–55.

Pujotomo, D., Nugroho, S., Sihombing, I. G., 2019, Analisis Tingkat Eko-Efisiensi Pada Pewarna Batik dengan Menggunakan Metode Life Cycle Assessment (LCA) pada UKM Batik Semarang 16, Seminar Nasional IENACO, 172–178.

Pratama, A., Nurfadila, S., 2022, Implementasi Strategi Operasi Manufaktur Hijau Menuju Keberlanjutan Manufaktur, Jurnal Ekonomia, 12(2), 31-39

Purwaningsih, R., Simanjuntak, C. F., Rosyada, Z. F., 2020. Eco-Efficiency of Pencil Preduction Using Life Cycle Assessment to Increase the Manufacture Sustainability. Jurnal Teknik Industri: Jurnal Keilmuan dan Aplikasi Teknik Industri, 22(1), 47–54.

Prabowo, R., Suryanto, A. P., 2019, Implementasi Lean dan Green Manufacturing Guna Meningkatkan Sustainability pada PT. Sekar Lima Pratama, Jurnal SENOPATI: Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering. 1(1). 52-63.

Rahmadi, A., Sari, N. M., Indriyani, E., 2022, Pemanfaatan Limbah Industri, CV Banyubening Cipta Sejahtera.

Sari, D. P., Hartini, S., Rinawati, D. I., Wahyudi, S. T., 2011. Pengukuran Tingkat Eko-efisiensi Menggunakan Life Cycle Assessment untuk Menciptakan Sustainable Production di Usaha Kecil Menengah Batik. Jurnal Teknik Industri. 14(2), 137-144

Sonia, R., Purwaningsih, R., 2024, Desain Peningkatan Eco-Efficiency Produk Jenang Pada UMKM Jenang Kudus Rizqina dengan Menggunakan Pendekatan Life Cycle Assessment (LCA), Industrial Engineering Online Journal, 13(1).

Widiyanto, A., 2022, Kontribusi Metode Life Cycle Assesment Biomassa untuk Agroindustri Berkelanjutan, BRIN




DOI: http://dx.doi.org/10.33087/ekonomis.v9i2.1952

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Ekonomis: Journal of Economics and Business Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat
Adress: LPPM Universitas Batanghari, Jl.Slamet Ryadi, Broni-Jambi, Kec.Telanaipura, Kodepos: 36122, email: ekonomis.unbari@gmail.com, Phone: 0741-670700

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.